Logitech 罗技K810 (Illuminated, 蓝牙, 键盘)

输入/输出 蓝牙, 键盘, 罗技 (Logitech), USB

Logitech 罗技K810 (Illuminated, 蓝牙, 键盘)
4 投票, 平均: 4.5 出最多 54 投票, 平均: 4.5 出最多 54 投票, 平均: 4.5 出最多 54 投票, 平均: 4.5 出最多 54 投票, 平均: 4.5 出最多 5
  ( 4.5 4 等级)

Logitech 罗技K810 
Minimum: ¥ 474.92 
Maximum: ¥ 521.31  
更新: 10/05/2016 03:29


The Logitech K810 is an illuminated keyboard which is connected per Bluetooth. Hence, the keyboard can be used for the PC but also for a tablet or a smartphone. It is pooible to switch between these different connections by the press of a button. The illumination is activated by a proximity sensor if the hands come near to the keyboard. Furthermore, the brightness of the keyboard adapts itself to the ambient light.

The keyboard is not automatically supported by Linux but can be used after some additional configuration (e.g. the configuration of a bluetoot connection is possuble under Ubuntu 12.04). The keyboard normally is not recognized by the standard Bluetooth programs under Ubuntu, i.e. gnome-bluetooth applet, blueman, and bluez-compat, or the pairing is lost at each restart of the PC.

A solution how the keyboard can be used nevertheless, can be found at http://devasive.blogspot.de/2012/11/ubuntu-1204-persistent-bluetooth-pairing.html.

First, the keyboard has to be in “visible” mode in order to get recognized by the PC.
Then, the MAC address of the keyboard can be found by

hcitool scan

Afterwards, the found MAC address XX:XX:XX:XX:XX:XX has to be used in the command Danach führt man aus:

sudo bluez-simple-agent hci0 XX:XX:XX:XX:XX:XX

The output of the command should be like

DisplayPasskey (/org/bluez/537/hci0/..., 123456)

where the keys “123456″ correspond to the PIN number which has to be entered at the keyboard to perform the pairing process. The numbers have to be finalzed by pressing “Enter”.
After successfully pairing the hardware the following output should be visible on the command line:

New device (/org/bluez/...

The now connected keyboard has to be added to the list of “Trusted Devices”:

sudo bluez-test-device trusted XX:XX:XX:XX:XX:XX yes

Connection has to be finalized by

sudo bluez-test-input connect XX:XX:XX:XX:XX:XX

From now on the pairing should be performed automatically at each reboot.


scroll left scroll right


请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
Submitting comment...