Delock 1x Parallel + 2x Serial (PCI 卡)

输入/输出 Delock, 并口, PCI, 串口

Delock 1x Parallel + 2x Serial (PCI 卡)
Linux兼容:
2 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 5
  ( 5 2 等级)



价格走势
Delock 1x Parallel + 2x Serial 
-
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 13/08/2015 19:46

回顾Linux的兼容性

The Delock PCI card 89004 extends the PC by 2 additional serial and by 1 parallel port.

The PCI card is recognized by the Linux kernel in the following way:

07:00.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01)
	Subsystem: LSI Logic / Symbios Logic Device 0012
	Flags: medium devsel, IRQ 16
	I/O ports at ec00 [size=8]
	I/O ports at e880 [size=8]
	I/O ports at e800 [size=8]
	I/O ports at e480 [size=8]
	I/O ports at e400 [size=8]
	I/O ports at e080 [size=16]
	Kernel modules: parport_serial

In order to use access the card, the kernel module parport_pc has to be loaded together with the IO ports and the interrupt of the card. It is possible to provide several parameters at once, e.g.:

/sbin/modprobe parport_pc io=0x378,0xc000,0xc800 irq=7,11

If the initialization of the Linux kernel module parport_pc was successful, the additional parallel port is listed at /proc/interrupts:

[...]
  7:          1   IO-APIC-edge      parport0
  8:          2   IO-APIC-edge      rtc
  9:          0   IO-APIC-fasteoi   acpi
 11:          0   IO-APIC-edge      parport1
[...]

The IO ports can be found at /proc/ioports

0378-037a : parport0
b400-b402 : parport3
b403-b407 : parport3
c000-c002 : parport1
c010-c012 : parport2

To automatically load the module at system boot a .conf file has to be created in the directory /etc/modprobe.d/ (e.g. in Ubuntu 12.10)

alias parport_lowlevel parport_pc
options parport_pc io=0x378,0xc000,0xc800 irq=7,11

类似Linux的硬件

scroll left scroll right

评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 
电子邮件地址不会被公开。
Submitting comment...