Samsung 三星 SCX-4726FN All-in-One (传真, 扫描器, 复印机, 打印机, USB 2.0, 以太网)

打印 复印 扫描 传真 打印 复印 扫描 传真, 以太网, , 三星 (Samsung), 扫描仪, USB

Samsung 三星 SCX-4726FN All-in-One (传真, 扫描器, 复印机, 打印机, USB 2.0, 以太网)
Linux兼容:
2 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 5
  ( 5 2 等级)



价格走势
Samsung 三星 SCX-4726FN All-in-One 
-
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 14/08/2015 05:42

回顾Linux的兼容性

The Samsung SCX-4726FN is fully supported under Linux by the drivers provided from Samsung. The following distributions are supported by the driver:

  • RedHat Enterprise Linux WS 4, 5 (32 / 64 Bit),
  • Fedora 5 – 13 (32 / 64 Bit),
  • SuSE Linux 10.1 (32 Bit),
  • OpenSuSE 10.2 – 11.2 (32 / 64 Bit),
  • Mandriva 2007 – 2010 (32/64 Bit),
  • Ubuntu 6.06 – 10.04 (32 / 64 Bit),
  • SuSE Linux Enterprise Desktop 10, 11 (32 / 64 Bit),
  • Debian 4.0, 5.0 (32 / 64 Bit)

Samsung Unified Driver

The All-in-One printer uses the “Unified Driver”. This driver can be downloaded fro the model SCX-4726FN from the following address: http://www.samsung.com/de/support/model/SCX-4726FN/XEC-downloads
For the installation of the “Samsung Unified Linux Driver” it is necessary that the programs CUPS, SANE, and GhostScript are also installed.

Alternatively, a repository of the Samsung Unified Driver von http://www.bchemnet.com/suldr/ can be used. This has the advantage that drivers will be updated automatically by the apt-get system.

First, the file /etc/apt/sources.list has to be changed

sudo nano /etc/apt/sources.list

and the following line has to be added to use the new repository:

deb http://www.bchemnet.com/suldr/ debian extra

Furthermore, the GPG key has to be added to the Apt system, to verify the downloaded files. After download of the key:

sudo wget http://www.bchemnet.com/suldr/suldr.gpg

it has to be added to the Apt system:

sudo apt-key add suldr.gpg

The APT database has to be updated to allow installation of the new packages:

sudo apt-get update
sudo apt-get install samsungmfp-data samsungmfp-driver samsungmfp-network samsungmfp-scanner samsungmfp-configurator-data samsungmfp-configurator-qt4 libsane-extras

Scanner

As soon as the Samsung Unified Driver is installed the scanner can be accessed. In order that the systems identifies the scanner the following command is necessary

scanimage -L

Afterwards the programs like Simple Scan can be used to scan with Linux.

Hardware specification can be found at: http://www.samsung.com/de/consumer/printers-mfp/mfp/mono-laser-mfps/SCX-4726FN/XEC-spec


类似Linux的硬件

scroll left scroll right

评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 
电子邮件地址不会被公开。
Submitting comment...