Creative D200 蓝牙 扬声器

多媒体 蓝牙, Creative, 喇叭

Creative D200 蓝牙 扬声器
Linux兼容:
2 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 5
  ( 5 2 等级)



价格走势
Creative D200 蓝牙 扬声器
-
Minimum: ¥ 356.77 
Maximum: ¥ 609.06  
更新: 22/03/2016 13:41

回顾Linux的兼容性

The Creative D200 is a sound speaker that can receive its audio signal per bluetooth. The speaker can be used together with Linux, if PC or Laptop get paired correctly with the sound speaker.

In Ubuntu 10.04 this can be achieved by the Bluetooth icon in the menu bar. Newer Ubuntu version with Unity have to use the Bluetooth configuration tool from the Dash.

  • First one has to start the scan for other Bluetooth equipment.
  • While scannin, the Bluetooth-button on the back of the speaker has to be pressed for 3 seconds.
  • The speaker will be found during the scan will be listed.
  • For pairing the PIN 0000 has to be entered.
  • Afterwards, the speaker has to be selected in the audio settings as a new sound destination (e.g. via the menue entry System Settings > Audio Settings or with Unity by using the audio symbol in the upper Menu bar > audio settings)
  • Creative D200 has to be selected as “Output”

A step-by-step explanation for Ubuntu 10.04 can be found at http://dakotux.wordpress.com/2011/03/27/creative-d200-on-linux/.

Instead of using Pulseaudio one can access the speaker by using ALSA. In this case the following package has to be installed (for Debian based distributions)

apt-get install bluez-alsa

Alsa needs additional configuration that is described at http://linuxpixies.blogspot.de/2011/09/how-to-bluetooth-speakers-without.html.


类似Linux的硬件

scroll left scroll right

评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 
电子邮件地址不会被公开。
Submitting comment...