> 多媒体 (302)
> 多媒体 > 监控摄像头 (14)
> 多媒体 > 另外的 (11)
> 多媒体 > 收音机 (2)
> 多媒体 > 声卡 (79)
> 多媒体 > 电视 (124)
> 多媒体 > 网络摄像头 (80)
The Asus MyCinema U3000H is a USB hybrid stick, which supports DVB-T as well as analog TV. Although the stick is recognized by the Kernel it is not usable, because the tuner can not be accessed.
The stick has the USB ID 0b05:1736
Bus 002 Device 002: ID 0b05:1736 ASUSTek Computer, Inc.
and is recognized by the Kernel in the follwing way, if plugged into the USB port:
usb 2-2: New USB device found, idVendor=0b05, idProduct=1736 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: U3000 Hybrid usb 2-2: Manufacturer: ASUSTeK usb 2-2: SerialNumber: 0A05600354 dvb-usb: found a 'Asus My Cinema-U3000Hybrid' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' dib0700: firmware started successfully. dvb-usb: found a 'Asus My Cinema-U3000Hybrid' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Asus My Cinema-U3000Hybrid) DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... xc2028 18-0061: creating new instance xc2028 18-0061: type set to XCeive xc2028/xc3028 tuner Registered IR keymap rc-dib0700-rc5 input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1/input12 rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1 dvb-usb: schedule remote query interval to 50 msecs dvb-usb: Asus My Cinema-U3000Hybrid successfully initialized and connected.
Although no error is casted by the kernel tuning is not possible and hence the stick can not be used under Linux.