Axle nVidia GeForce FX 5500

显卡 DVI, GeForce, 显卡, Nvidia公司, PCIe, TV-Out, VGA

Axle nVidia GeForce FX 5500
Linux兼容:
2 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 5
  ( 5 2 等级)

类别:


价格走势
Axle nVidia GeForce FX 5500
-
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 15/08/2015 19:51

回顾Linux的兼容性

The PCI-Express graphic card Axle NVidia GeForce 5500 is equipped with 256MB GDDR Ram and has a DVI, VGA and TV- output

The card is recognized by Linux automatically:

01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1) (prog-if 00 [VGA controller])

The TV output can be used with Linux with the following settings:

Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
VGA-1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 256mm
   1440x900       60.0*+   75.0  

DVI-I-1 disconnected (normal left inverted right x axis y axis)
TV-1 connected 1024x768+200+60 (normal left inverted right x axis y axis) 0mm x 0mm
   720x576        50.0 +
   1024x768       50.0*

To install the nvidia-own non-free drivers in Ubuntu the program “Additional Drivers” has to be installed installiert werden respectively the following package is needed:

sudo apt-get install nvidia-glx
sudo dpkg-reconfigure xserver-xorg

and the active driver has to be set to nvidia. After configuration of the driver by using the command

sudo nvidia-glx-config

a restart of the X-Server is necessary.


类似Linux的硬件

scroll left scroll right

评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 
电子邮件地址不会被公开。
Submitting comment...