Hauppauge 哈帕克 WinTV HVR-1700 DVB-T + 类似物 PCI-E

多媒体 DVB-C, DVB-T, 哈帕克 (Hauppauge), PCIe, 电视

Hauppauge 哈帕克 WinTV HVR-1700 DVB-T + 类似物 PCI-E
Linux兼容:
2 投票, 平均: 2.0 出最多 52 投票, 平均: 2.0 出最多 52 投票, 平均: 2.0 出最多 52 投票, 平均: 2.0 出最多 52 投票, 平均: 2.0 出最多 5
  ( 2 2 等级)



价格走势
Hauppauge 哈帕克 WinTV HVR-1700 DVB-T + 类似物 PCI-E
-
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 02/08/2015 10:40

回顾Linux的兼容性

The Hauppauge WinTV HVR-1700 (Model 81xxx) is a PCI-Express card equipped with a DVB-T and analog tuner. The card is partly supported since Ubuntu 11.04.
Warning: Only the DVB-T tuner is supported by Linux!

The card needs the firmware files dvb-fe-tda10048-1.0.fw, v4l-cx23885-avcore-01.fw and v4l-cx23885-enc.fw, which can be installed in Ubuntu by the package “linux-firmware-nonfree”:

sudo apt-get install linux-firmware-nonfree

Alternatively the firmware can be downloaded from http://steventoth.net/linux/hvr1700/.

The card gets recognized by the Linux kernel in the following way (source: http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1700):

cx23885 driver version 0.0.2 loaded
cx23885 0000:04:00.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
cx23885[0]/0: cx23885_dev_setup() Memory configured for PCIe bridge type 885
cx23885[0]/0: cx23885_init_tsport(portno=2)
CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge WinTV-HVR1700 [card=8,autodetected]
cx23885[0]/0: cx23885_pci_quirks()
cx23885[0]/0: cx23885_dev_setup() tuner_type = 0x0 tuner_addr = 0x0
cx23885[0]/0: cx23885_dev_setup() radio_type = 0x0 radio_addr = 0x0
cx23885[0]/0: cx23885_reset()
cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [VID A]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch2]
cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS1 B]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch4]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch5]
cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS2 C]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch7]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch8]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch9]
tveeprom 7-0050: Hauppauge model 81519, rev B2E9, serial# 6177447
tveeprom 7-0050: MAC address is 00-0D-FE-5E-42-A7
tveeprom 7-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
tveeprom 7-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 7-0050: audio processor is CX23885 (idx 39)
tveeprom 7-0050: decoder processor is CX23885 (idx 33)
tveeprom 7-0050: has no radio
cx23885[0]: hauppauge eeprom: model=81519
cx25840 9-0044: cx25  0-21 found @ 0x88 (cx23885[0])
cx25840 9-0044: firmware: requesting v4l-cx23885-avcore-01.fw
cx25840 9-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
tda829x 8-0042: type set to tda8295
tda18271 8-0060: creating new instance
TDA18271HD/C1 detected @ 8-0060
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xfe800000
cx23885 0000:04:00.0: setting latency timer to 64

类似Linux的硬件

scroll left scroll right

评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 
电子邮件地址不会被公开。
Submitting comment...