Hauppauge 哈帕克 HVR-2200 (PCIe, 2x DVB-T, 1x 类似物)

多媒体 DVB-T, 哈帕克 (Hauppauge), PCIe, 电视

Hauppauge 哈帕克 HVR-2200 (PCIe, 2x DVB-T, 1x 类似物)
Linux兼容:
2 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 5
  ( 5 2 等级)



价格走势
Hauppauge 哈帕克 HVR-2200 
-
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 12/08/2015 07:16

回顾Linux的兼容性

The Hauppauge HVR-2200 PCI-Express card (model 89xxx) is equipped with 2 DVB-T tuners and a analog tuner. The card is supported since Linux kernel 2.6.37 and hence can be used since Ubuntu 11.04.

The card needs four firmware files (available for download from http://www.steventoth.net/:

The card has the following characteristics (source: http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2200)

02:00.0 Multimedia controller: Philips Semiconductors Unknown device 7164 (rev 81)
        Subsystem: Hauppauge computer works Inc. Unknown device 8901
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 255
        Region 0: Memory at fd400000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at fd000000 (64-bit, non-prefetchable) [size=4M]
        Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [50] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <4us, L1 <64us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [74] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [7c] Vendor Specific Information <?>
        Capabilities: [100] Vendor Specific Information <?>
        Capabilities: [160] Virtual Channel <?>

类似Linux的硬件

scroll left scroll right

评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 
电子邮件地址不会被公开。
Submitting comment...