LogiLink Fast 以太网 Printserver Parallel Port (PS0001)

打印机 , 打印机, 打印服务器

LogiLink Fast 以太网 Printserver Parallel Port (PS0001)
Linux兼容:
6 投票, 平均: 4.7 出最多 56 投票, 平均: 4.7 出最多 56 投票, 平均: 4.7 出最多 56 投票, 平均: 4.7 出最多 56 投票, 平均: 4.7 出最多 5
  ( 4.7 6 等级)



价格走势
LogiLink Fast 以太网 Printserver Parallel Port 
-
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 14/08/2015 22:22

回顾Linux的兼容性

The LogiLink Printserver PS0001 can be used to connect (older) printers with parallel port interface (Centronics socket) to the network in a low priced manner. The print server has 512 kb flash and 2 MB SD RAM and is configured per netzwork (HTTP).

The print server has a Centronics 36 pin plug (male) to connect the device directly on the printer and is equipped with a RJ45 socket as interface to the netzwork (10/100 MBit).

The following protocols are supported: LPR, IPP, RAW printing, Unix Logical Printing, Apple Talk, NetWare, SMB/TCP, NetBeui. Thanks to the LPR protocol the print server can be used by Linux. The IP adress of the device can be configured by DHCP.


类似Linux的硬件

scroll left scroll right

评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 
电子邮件地址不会被公开。
Submitting comment...