D-Link DGE-528T Gigabit Network 卡

以太网 以太网, Gigabit, , PCI

D-Link DGE-528T Gigabit Network 卡
Linux兼容:
7 投票, 平均: 4.4 出最多 57 投票, 平均: 4.4 出最多 57 投票, 平均: 4.4 出最多 57 投票, 平均: 4.4 出最多 57 投票, 平均: 4.4 出最多 5
  ( 4.4 7 等级)



价格走势
D-Link DGE-528T Gigabit Network 卡
-
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 16/08/2015 21:25

回顾Linux的兼容性

The Linux compatible Gigabit PCI network card D-Link DGE-528T (S/N: F3511B801084) has a very good price-performace ratio and is supported by Linux kernel Versions 2.4, 2.6 and 3.0 out-of-the-box. Furthermore, several cards can be used on one mainboard in parallel. Hence, the card is ideal for firewalls.

Before usage it should be verified that the mainboard supports the PCI 2.2 specification, because the card can not be used on older mainboards which only support PCI 2.1 (or lower).

The card is shipped with manual, driver software, low profile front panel and Wake-on-LAN cable:

The network card uses the Linux kernel module (e.g. Linux 2.6.48) r8169 and is initialized by the kernel in the following way:

 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:04:01.0: found PCI INT A -> IRQ 5
 r8169 0000:04:01.0: (unregistered net_device): no PCI Express capability
 r8169 0000:04:01.0: eth0: RTL8169sb/8110sb at 0xf8018800, 84:c9:b2:43:09:fa, XID 10000000 IRQ 5

The DGE-528T has the PCI-ID 1186:4300, can be recognized by the following lspci output:

04:01.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter (rev 10)
Subsystem: D-Link System Inc DGE-528T Gigabit Ethernet Adapter
Kernel driver in use: r8169

and has the following characteristics:

 description: Ethernet interface
 product: DGE-528T Gigabit Ethernet Adapter
 vendor: D-Link System Inc
 version: 10
 size: 1Gbit/s
 capacity: 1Gbit/s
 width: 32 bits
 clock: 66MHz
 capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt
                    100bt-fd 1000bt 1000bt-fd autonegotiation
 configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI
                       duplex=full ip=192.168.13.100 latency=64 link=yes maxlatency=64
                       mingnt=32 multicast=yes port=MII speed=1Gbit/s

类似Linux的硬件

scroll left scroll right

评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 
电子邮件地址不会被公开。
Submitting comment...