LogiLink Express Card IEEE1394a (2 x FireWire, PC0036A)

I/O Express Card, FireWire, IEEE1394, Logilink

LogiLink Express Card IEEE1394a (2 x FireWire, PC0036A)
Linux compatibility:
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)


Price trend
LogiLink Express Card IEEE1394a 
Minimum: £ 12.60 
Maximum: £ 21.59  
Updated: 10/05/2016 03:15

Review of Linux Compatibility

The LogiLink Express Card with the product ID PC0036A extends the Laptop/PC by two FireWire ports (IEEE1394a).

The card is automatically recognized by the Linux kernel if plugged in:

pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
pci 0000:06:00.0: PME# supported from D0
pci 0000:06:00.0: PME# disabled
pciehp: Could not get hotplug parameters
ohci1394 0000:06:00.0: enabling device (0000 -> 0003)
ohci1394 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[c4000000-c40007ff]  Max Packet=[2]  IR/IT contexts=[4/4]

In parallel, the kernel automatically loads (since Ubuntu 9.10) the necessary kernel modules :

raw1394                29096  0
dv1394                 21096  0
ohci1394               33780  1 dv1394
ieee1394              100896  3 raw1394,dv1394,ohci1394

and creates the device dev/raw1394.

A device connected to the first port of the Express Card can only be used if also a device is connected to the second port (e.g. an external hard disk). This is due to a hardware error of the card which is independent of the operating system in use and also is valid for Windows.

Similar Linux Hardware

scroll left scroll right


Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
Email address will not be published.
Submitting comment...