Hauppauge WinTV HVR-1700 DVB-T + Analogue PCI-E

Multimedia DVB-C, DVB-T, Hauppauge, PCIe, TV

Hauppauge WinTV HVR-1700 DVB-T + Analogue PCI-E
Linux compatibility:
2 votes, average: 2.0 out of 52 votes, average: 2.0 out of 52 votes, average: 2.0 out of 52 votes, average: 2.0 out of 52 votes, average: 2.0 out of 5
  ( 2 with 2 ratings)



Price trend
Hauppauge WinTV HVR-1700 DVB-T + Analogue PCI-E
-
Minimum: £ 77.36 
Maximum: £ 128.99  
Updated: 09/03/2016 10:35

Review of Linux Compatibility

The Hauppauge WinTV HVR-1700 (Model 81xxx) is a PCI-Express card equipped with a DVB-T and analog tuner. The card is partly supported since Ubuntu 11.04.
Warning: Only the DVB-T tuner is supported by Linux!

The card needs the firmware files dvb-fe-tda10048-1.0.fw, v4l-cx23885-avcore-01.fw and v4l-cx23885-enc.fw, which can be installed in Ubuntu by the package “linux-firmware-nonfree”:

sudo apt-get install linux-firmware-nonfree

Alternatively the firmware can be downloaded from http://steventoth.net/linux/hvr1700/.

The card gets recognized by the Linux kernel in the following way (source: http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1700):

cx23885 driver version 0.0.2 loaded
cx23885 0000:04:00.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
cx23885[0]/0: cx23885_dev_setup() Memory configured for PCIe bridge type 885
cx23885[0]/0: cx23885_init_tsport(portno=2)
CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge WinTV-HVR1700 [card=8,autodetected]
cx23885[0]/0: cx23885_pci_quirks()
cx23885[0]/0: cx23885_dev_setup() tuner_type = 0x0 tuner_addr = 0x0
cx23885[0]/0: cx23885_dev_setup() radio_type = 0x0 radio_addr = 0x0
cx23885[0]/0: cx23885_reset()
cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [VID A]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch2]
cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS1 B]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch4]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch5]
cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS2 C]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch7]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch8]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch9]
tveeprom 7-0050: Hauppauge model 81519, rev B2E9, serial# 6177447
tveeprom 7-0050: MAC address is 00-0D-FE-5E-42-A7
tveeprom 7-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
tveeprom 7-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 7-0050: audio processor is CX23885 (idx 39)
tveeprom 7-0050: decoder processor is CX23885 (idx 33)
tveeprom 7-0050: has no radio
cx23885[0]: hauppauge eeprom: model=81519
cx25840 9-0044: cx25  0-21 found @ 0x88 (cx23885[0])
cx25840 9-0044: firmware: requesting v4l-cx23885-avcore-01.fw
cx25840 9-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
tda829x 8-0042: type set to tda8295
tda18271 8-0060: creating new instance
TDA18271HD/C1 detected @ 8-0060
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xfe800000
cx23885 0000:04:00.0: setting latency timer to 64

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...