> Multimedia (302)
> Multimedia > CCTV (14)
> Multimedia > Misc (11)
> Multimedia > Radio (2)
> Multimedia > Sound (79)
> Multimedia > TV (124)
> Multimedia > Webcam (80)
The Mystique SaTiX-S2 Sky V2 USB is an external USB box to receive DVB-S2 at a Linux PC. The box has the USB ID
Bus 006 Device 002: ID 0572:6831 Conexant Systems (Rockwell), Inc.
The manufacturer DVBSky provides Linux drivers by their. Unfortunately, the drivers are not yet in the standard Linux kernel. The driver can be found at http://www.dvbsky.net/Support.html. There, one can also find an installation instruction.
In summary, one has to download and unpack the drivers. Afterwards, the make file has to be generated based on the used system, e.g. for 32bit Linux systems by
to compile and install the driver, i.e. the kernel module dvb_usb_dw2102, by:
make sudo make install
Furthermore, the firmware file “dvb-fe-ds3000.fw” has to be copied to /lib/firmware.
If the installation was successful, the module gets loaded by the kernel with the following message:
dw2102: su3000_identify_state dvb-usb: found a 'Bestunar US6831 HD' in warm state. dw2102: su3000_power_ctrl: 1, initialized 0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Bestunar US6831 HD) ff 00 00 00 00 00 ff ff 00 00 00 00 ff ff ff 00 00 00 ff ff ff ff 00 00 ff ff ff ff ff 00 ff ff ff ff ff ff dvb-usb: MAC address: ff:ff:ff:ff:ff:ff dw2102: US6830: US6830_frontend_attach! DS3000 chip version: 0.192 attached. dw2102: Attached DS3000! DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)... input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/usb6/6-3/input/input2 dvb-usb: schedule remote query interval to 150 msecs. dw2102: su3000_power_ctrl: 0, initialized 1 dvb-usb: Bestunar US6831 HD successfully initialized and connected. usbcore: registered new interface driver dw2102 dw2102: su3000_power_ctrl: 1, initialized 1 ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)... ds3000_firmware_ondemand: Waiting for firmware upload(2)... dw2102: US6830: bstusb_set_voltage! dw2102: US6830: bstusb_set_voltage! dw2102: su3000_power_ctrl: 0, initialized 1 dw2102: su3000_power_ctrl: 1, initialized 1 dw2102: US6830: bstusb_set_voltage!
The Mystique SaTiX-S2 Sky V2 USB is shipped together with a remote. The USB box includes a infraread receiver that is supported by Linux:
I: bus=0003 vendor=0572 product=6831 version=0000 N: name=IR-receiver inside an USB DVB receiver P: phys=usb-0000:01:00.0-3/ir0 S: sysfs=/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/usb6/6-3/input/input2 U: uniq= H: handlers=kbd event2 B: prop=0 B: ev=3 B: key=3c100 200200100000000 0 18000 18040000801 9e168000000000 ffe
and can be used together with LIRC.