Hauppauge WinTV HVR-1400 (ExpressCard, DVB-T, Analog-TV)

Multimedia Analog TV, DVB-T, Express Card, Hauppauge, TV

Hauppauge WinTV HVR-1400 (ExpressCard, DVB-T, Analog-TV)
Linux compatibiliteit:
2 Beoordelingen, gemiddelde: 5,0 van de maximale 52 Beoordelingen, gemiddelde: 5,0 van de maximale 52 Beoordelingen, gemiddelde: 5,0 van de maximale 52 Beoordelingen, gemiddelde: 5,0 van de maximale 52 Beoordelingen, gemiddelde: 5,0 van de maximale 5
  ( 5 big 2 beoordelingen)



Linux compatibiliteit

The Hauppauge WinTV HVR-1400 is a TV card for DVB-T and analog TV reception as a ExpressCard/54.

The card is fully supported by Linux and identified in the following way:

02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI
Video and Audio Decoder (rev 02)
         Subsystem: Hauppauge computer works Inc. Hauppauge WinTV HVR-1400 ExpressCard

A firmware file is needed to initlaize the card. This file can be found at http://www.steventoth.net/linux/hvr1400/xc3028L-v36.fw and has to be copied to /lib/firmware:

cp xc3028L-v36.fw /lib/firmware/

Afterward, the card is activated automatically after booting, if the card is already inserted.

Depending on the used Linux distribution it can happen that the card will not be initialized automatically if it is plugged in while the system is already running. In this case the needed kernel modules have to be loaded by hand:

sudo modprobe pciehp pciehp_force=1

The card is then initialized with the following kernel messages:

cx23885 driver version 0.0.3 loaded
cx23885[0]: cx23885_dev_setup() Memory configured for PCIe bridge type 885
cx23885[0]: cx23885_init_tsport(portno=2)
btcx: riscmem alloc [1] dma=322f3000 cpu=f22f3000 size=64
CORE cx23885[0]: subsystem: 0070:8010, board: Hauppauge WinTV-HVR1400 [card=9,autodetected]
tveeprom 7-0050: Hauppauge model 80019, rev B2F1, serial# 3758890
tveeprom 7-0050: MAC address is 00:11:22:33:44:55
tveeprom 7-0050: tuner model is Xceive XC3028L (idx 151, type 4)
tveeprom 7-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 7-0050: audio processor is CX23885 (idx 39)
tveeprom 7-0050: decoder processor is CX23885 (idx 33)
tveeprom 7-0050: has radio
cx23885[0]: hauppauge eeprom: model=80019
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
xc2028: Xcv2028/3028 init called!
xc2028 8-0064: creating new instance
xc2028 8-0064: type set to XCeive xc2028/xc3028 tuner
xc2028 8-0064: xc2028_set_config called
DVB: registering new adapter (cx23885[0])
cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
xc2028 8-0064: request_firmware_nowait(): OK
xc2028 8-0064: load_all_firmwares called
[...]
xc2028 8-0064: Firmware files loaded.

Vergelijkbare Linux hardware

scroll left scroll right

Reageren en beoordelen

Laat in de comments sectie beoordeling of commentaar en correcties op het artikel. Bijzonder nuttig zijn Ausz navigatie gebruik van ge lspci -nnk, lsusb, lshw, dmesg, enz, indien deze niet worden opgenomen in het artikel. Blijft het serveren. Het commentaar gebied van ervaringen tussen de eigenaars van de hardware-component en de Zoeken Configuratie Help Hotel
 
E-mailadres wordt niet gepubliceerd.
Submitting comment...