Canon PIXMA MG5150 All-in-One (プリンタ, コピー機, Scanner)

オールインワンプリンター オールインワンプリンター, カノン(Canon), Pixma, プリンタ, スキャナー, USB, 無線LAN

Canon PIXMA MG5150 All-in-One (プリンタ, コピー機, Scanner)
Linuxの互換性:
4 投票, 平均: 5.0 最大のうち 54 投票, 平均: 5.0 最大のうち 54 投票, 平均: 5.0 最大のうち 54 投票, 平均: 5.0 最大のうち 54 投票, 平均: 5.0 最大のうち 5
  ( 5 とともに 4 評価)



価格動向
Canon PIXMA MG5150 All-in-One 
-
Minimum: ¥ 0 
Maximum: ¥ 0  
更新: 14/08/2015 00:24

Linuxの互換性の検討

The Canon PIXMA MG5150 is a All-in-One printer with atomatic duplex printing and scanner. The MG5150 is supported by Linux and can be connected by USB or WiFi.

The printer has the USB ID 04a9:1748 and is recognized by the Linux Kernel in the following way:

 Bus 001 Device 003: ID 04a9:1748 Canon, Inc. Pixma MG5150

The printer can be used with Gutenprint or with the drivers provided by Canon. Gutenprint has supports for the PIXMA MG5150 since version 5.2.9 of the driver bjc-PIXMA-MG5100. The Gutenprint driver normally is already included in current Linux distributions (e.g. Ubuntu 12.10).

Alternatively the Canon driver can be used. The installation of this driver is explained in detail at http://wiki.ubuntuusers.de/Canon-Drucker (Using the Canon Driver is only recommended if there are problems with the Gutenprint driver.)
The following Canon driver files are needed:

cnijfilter-common_3.40-1_amd64.deb
cnijfilter-common_3.40-1_i386.deb
cnijfilter-mg5100series_3.40-1_amd64.deb
cnijfilter-mg5100series_3.40-1_i386.deb

All of these files can be downloaded at the Canon homepage (already combined in one file): http://software.canon-europe.com/products/0010887.asp.
The Debian and Ubuntu packages can also be added to the system by adding the PPA ppa:michael-gruz/canon-trunk to apt-get.

The included scannet is suported in two ways. One can select between the Canon driver and the PIXMA driver from Sane.

Using the Sane driver has the benefit that the drivers are automatically updated by the package manager of the distribution. If the ID of the All-in-One printer is not included in the Sane configuration files, e.g. if the Sane version provided by the distribution is outdated, the scanner will not be recognized by Sane. In this case the USB ID has to be added to the file “/lib/udev/rules.d/40-libsane.rules”:

# Canon PIXMA MG5150
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="1748", ENV{libsane_matched}="yes"

One can also use the driver provided by Canon and the Canon scan tool scangearamp. The corresponding files can be found at and downloaded from the Canon Homepage. The installation is executed by the installation script included in the downloaded package:

cd /home/myhome/"Linux IJ Scan Driver_mg5100/scangearmp-mg5100series-1.60-1-rpm"
sudo sh ./install.sh

同じようなLinuxのハードウェア

scroll left scroll right

注釈

記事の訂正を提出するだけでなく、の lspci -nnv, lsusb, lshw, dmesgなどの関連抜粋するコメントセクションを使用してください さらに、このハードウェアコンポーネントまたはこのハードウェアの他の所有者からの構成のヘルプを検索すると経験の交換のためのセクションを使用します。
 
メールアドレスが公開されることはありません。.
Submitting comment...