Logitech K810 (Illuminato, Bluetooth, Tastiera)

I/O Bluetooth, Tastiera, Logitech, USB

Logitech K810 (Illuminato, Bluetooth, Tastiera)
Compatibilità con Linux:
4 valutazioni, media: 4,5 su 54 valutazioni, media: 4,5 su 54 valutazioni, media: 4,5 su 54 valutazioni, media: 4,5 su 54 valutazioni, media: 4,5 su 5
  ( 4.5 con 4 valuationi)

Prezzo: EUR 155,00 (disponible)
(senza spese di spedizione)

 Acquistare da Amazon.it


Andamento dei prezzi
Logitech K810 
Minimum: EUR 70,00 
Maximum: EUR 152,39  
Aggiornato: 10/05/2016 03:28

Recensione di Compatibilità con Linux

The Logitech K810 is an illuminated keyboard which is connected per Bluetooth. Hence, the keyboard can be used for the PC but also for a tablet or a smartphone. It is pooible to switch between these different connections by the press of a button. The illumination is activated by a proximity sensor if the hands come near to the keyboard. Furthermore, the brightness of the keyboard adapts itself to the ambient light.

The keyboard is not automatically supported by Linux but can be used after some additional configuration (e.g. the configuration of a bluetoot connection is possuble under Ubuntu 12.04). The keyboard normally is not recognized by the standard Bluetooth programs under Ubuntu, i.e. gnome-bluetooth applet, blueman, and bluez-compat, or the pairing is lost at each restart of the PC.

A solution how the keyboard can be used nevertheless, can be found at http://devasive.blogspot.de/2012/11/ubuntu-1204-persistent-bluetooth-pairing.html.

First, the keyboard has to be in “visible” mode in order to get recognized by the PC.
Then, the MAC address of the keyboard can be found by

hcitool scan

Afterwards, the found MAC address XX:XX:XX:XX:XX:XX has to be used in the command Danach führt man aus:

sudo bluez-simple-agent hci0 XX:XX:XX:XX:XX:XX

The output of the command should be like

DisplayPasskey (/org/bluez/537/hci0/..., 123456)

where the keys “123456″ correspond to the PIN number which has to be entered at the keyboard to perform the pairing process. The numbers have to be finalzed by pressing “Enter”.
After successfully pairing the hardware the following output should be visible on the command line:

New device (/org/bluez/...

The now connected keyboard has to be added to the list of “Trusted Devices”:

sudo bluez-test-device trusted XX:XX:XX:XX:XX:XX yes

Connection has to be finalized by

sudo bluez-test-input connect XX:XX:XX:XX:XX:XX

From now on the pairing should be performed automatically at each reboot.

Linux Hardware simile

scroll left scroll right


Si prega di utilizzare la sezione commenti a presentare correzioni per l'articolo e le pertinenti stralci di lspci -vnn, lsusb, lshw, dmesg, Inoltre, utilizzare la sezione per lo scambio di esperienze con questo componente hardware o ricerca di aiuto configurazione da altri proprietari di questo hardware.
L'indirizzo di posta elettronica non sarà pubblicato.
Submitting comment...