HP LaserJet Pro M1132 Stampanti Multifunzione Stampante Laser (A4, Stampante, Scanner, Copista, USB, 600×600)

Stampante Multifunzione Stampante Multifunzione, HP, Stampante Laser, Scanner, USB

HP LaserJet Pro M1132 Stampanti Multifunzione Stampante Laser (A4, Stampante, Scanner, Copista, USB, 600×600)
Compatibilità con Linux:
2 valutazioni, media: 5,0 su 52 valutazioni, media: 5,0 su 52 valutazioni, media: 5,0 su 52 valutazioni, media: 5,0 su 52 valutazioni, media: 5,0 su 5
  ( 5 con 2 valuationi)

Prezzo: EUR 564,81 (disponible)
(senza spese di spedizione)

 Acquistare da Amazon.it



Andamento dei prezzi
HP LaserJet Pro M1132 Stampanti Multifunzione Stampante Laser 
-
Minimum: EUR 79,00 
Maximum: EUR 299,99  
Aggiornato: 09/11/2016 19:18

Recensione di Compatibilità con Linux

The HP Laserjet Pro M1132 is a All-in-One device with integrated laser printer, that has a maximal resolution of 600×600 dpi. This Laserjet is connected per USB and has the USB ID 03f0:042a:

Hewlett Bus 001 Device 002: ID 03f0:042a Hewlett-Packard

The printer and the scanner are fully supported by Linux. The printer is supported by the OpenSource driver foo2xqx, which uses the XQX Stream Protocol, but can as well be used with the HP driver HPLIP. The minimal version of the HPLIP driver is 3.10.4 to fully support the printer.

In Ubuntu (e.g.. 12.04) the package hplip is already included. Alternatively, the driver can be downloaded at:
http://hplipopensource.com/hplip-web/models/laserjet/hp_laserjet_professional_m1132_mfp.html. In this case the driver has to be installed after downloading it (after unpacking it. root access will be necessary for the installation):

sh hplip-3.11.7.run

In Ubuntu the installation can be performed with the package management system and the configuration can be carried out by the command:

sudo hp-setup

During the setup proprietary binary files will be downloaded from the internet. Therefore, an internet connection is necessary to successfully setup the driver.

Scanner:

The scanner will be found by the installied Scanimage program:

device `hpaio:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH4AEMTPR1a' is a Hewlett-Packard HP_LaserJet_Professional_M1132_MFP all-in-one

If the scanner is found the scan can be startet by the console program

hp-scan

If a paper is placed in the scanner and the scan button on the printer is pressed, the scanned image will be copied to the home folder as “hpscan001.png”.


Linux Hardware simile

scroll left scroll right

Commenti

Si prega di utilizzare la sezione commenti a presentare correzioni per l'articolo e le pertinenti stralci di lspci -vnn, lsusb, lshw, dmesg, Inoltre, utilizzare la sezione per lo scambio di esperienze con questo componente hardware o ricerca di aiuto configurazione da altri proprietari di questo hardware.
 
L'indirizzo di posta elettronica non sarà pubblicato.
Submitting comment...