TerraTec S7 (DVB-S2, DVB-S, Radio, CI-Module, USB 2.0)

Multimedia CI Slot, DVB-S, DVB-S2, HDTV, Radio, TerraTec, TV, USB

TerraTec S7 (DVB-S2, DVB-S, Radio, CI-Module, USB 2.0)
Compatibilità con Linux:
2 valutazioni, media: 3,0 su 52 valutazioni, media: 3,0 su 52 valutazioni, media: 3,0 su 52 valutazioni, media: 3,0 su 52 valutazioni, media: 3,0 su 5
  ( 3 con 2 valuationi)

Prezzo: EUR 101,84 (disponible)
(senza spese di spedizione)

 Acquistare da Amazon.it



Andamento dei prezzi
TerraTec S7 
-
Minimum: EUR 100,00 
Maximum: EUR 179,00  
Aggiornato: 13/07/2016 07:41

Recensione di Compatibilità con Linux

The TerraTec S7 is connected via USB and receives DVB-S and DVB-S2 signals. Additionally, the S7 is equipped with a Common Interface (CI) module.

The USB device is available in three different versions that can be distinguished by their USB IDs:

Bus 002 Device 003: ID 0ccd:10a4 TerraTec Electronic GmbH
Bus 002 Device 006: ID 0ccd:10ac TerraTec Electronic GmbH
Bus 002 Device 006: ID 0ccd:10b0 TerraTec Electronic GmbH

All three revisions are supported by Linux, even the included CI module can be used. However, the TerraTec S7 is not supported automatically by the Linux kernel. Instead necessary kernel modules have to be compiled by hand.

The support for the TerraTec S7 is provided by the S2-liblianin tree of the Video-4-Linux drivers. The source code of Liplianin can be found at https://bitbucket.org/liplianin/.

Furthermore, the S7 needs the firmware file dvb-usb-az67027-03.fw, which can be downloaded from TerraTec: http://linux.terratec.de/files/TERRATEC_S7/dvb-usb-az6027-03.fw. This file has to be copied to /lib/firmware:

sudo cp dvb-usb-az6027-03.fw /lib/firmware

Version 1 – ID 0ccd:10a4

A successful initialization of the Version 1 of the TerraTec S7 is announced by the kernel in the following way:

dvb-usb: found a 'TERRATEC S7' in cold state, will try to load a firmware
usb 2-2: firmware: requesting dvb-usb-az6027-03.fw
dvb-usb: downloading firmware from file 'dvb-usb-az6027-03.fw'
dvb-usb: found a 'TERRATEC S7' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TERRATEC S7)
DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:06.1/usb2/2-2/input/input10
dvb-usb: schedule remote query interval to 400 msecs.
dvb-usb: TERRATEC S7 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_az6027

Version 2 – ID 0ccd:10ac

The version 2 of the TerraTec S7 can be used together with the same firmware files as version 1. Initialization is -shown by the kernel very analously:

dvb-usb: downloading firmware from file 'dvb-usb-az6027-03.fw'
dvb-usb: found a 'TERRATEC S7 MKII' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TERRATEC S7 MKII)
DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input10
dvb-usb: schedule remote query interval to 400 msecs.
dvb-usb: TERRATEC S7 MKII successfully initialized and connected.
DVB: adapter 0 frontend 0 frequency 22000000 out of range (950000..2150000)

Version 3 – ID 0ccd:10b0

The third version needs a modified firmware file in the /lib/firmware folder:

wget http://linux.terratec.de/files/TERRATEC_S7/20110630_TERRATEC_S7r3_Linux.tar.gz
tar -xf 20110630_TERRATEC_S7r3_Linux.tar.gz
sudo cp 20110630_TERRATEC_S7r3_Linux/dvb-usb-az6027-03.fw /lib/firmware

Linux Hardware simile

scroll left scroll right

Commenti

Si prega di utilizzare la sezione commenti a presentare correzioni per l'articolo e le pertinenti stralci di lspci -vnn, lsusb, lshw, dmesg, Inoltre, utilizzare la sezione per lo scambio di esperienze con questo componente hardware o ricerca di aiuto configurazione da altri proprietari di questo hardware.
 
L'indirizzo di posta elettronica non sarà pubblicato.
Submitting comment...