Seagate ST380819AS (Hard Drive, 80 GB, SATA, 7200 RPM)

DVD / CD / HD Harddisk, SATA, Seagate

Seagate ST380819AS (Hard Drive, 80 GB, SATA, 7200 RPM)
Linux compatibility:
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)

Review of Linux Compatibility

The Seagate ST380819AS is a with 80 GB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
ata3: SATA max UDMA/133 cmd 0x10d8 ctl 0x10f0 bmdma 0x10b0 irq 19
ata3.00: ATA-7: ST380819AS, 3.02, max UDMA/100
ata3.00: 156301488 sectors, multi 16: LBA48
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      ST380819AS       3.02 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 1562620k swap on /dev/sda5.  Priority:-1 extents:1 across:1562620k FS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

Identified Hardware Configurations (2 Results)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Scan Date
blackPanther OS v16.2SE (Silent Killer) 4.7.0-desktop-1bP - 07/10/2017
Ubuntu 14.04.5 LTS 3.13.0-104-generic - 04/12/2016

Similar Linux Hardware

scroll left scroll right


Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
Email address will not be published.
Submitting comment...