> Network (216)
> Network > Ethernet (45)
> Network > PowerLAN / dLAN (1)
> Network > UMTS / GSM / HSDPA (17)
> Network > Wireless (151)
Review of Linux Compatibility
The USB 2.0 adapter D-Link DUB-E100 provides a RJ45 socket at an USB port. The adapter exists in at least three different versions (A4, B1, B1 alternate). All three verions are supported by the Linux Kernel since version 2.6.19, whereas the kernel 2.4 only supports the version A4.
All versions base on the ASIX 8817x chipset, which needs the kernel modules asix together with the module usbnet.
new high speed USB device using ehci_hcd and address 3 new device found, idVendor=2001, idProduct=3c05 new device strings: Mfr=1, Product=2, SerialNumber=3 Product: DUB-E100 Manufacturer: D-Link Corporation configuration #1 chosen from 1 choice
Each of the three versions has a different USB ID:
Version USB-ID ----------------------------- A4 0x2001:0x1A00 B1 0x07d1:0x3c05 B1 alternate 0x2001:0x3c05
Hence, the version B1 can be identified by lsusb in the following way:
Bus 001 Device 009: ID 2001:3c05 D-Link Corp. [hex]
Identified Hardware Configurations (1 Result)This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
||ALT Linux 7.0.5 School Server||4.1.18-un-def-alt0.M70P.1||10/03/2016|