HP LaserJet Pro M1132 Imprimante tout-en-un Imprimante Laser (A4, Imprimante, Scanneur, Copieur, USB, 600×600)

Imprimante tout-en-un Imprimante tout-en-un, HP, Imprimante laser, Scanneur, USB

HP LaserJet Pro M1132 Imprimante tout-en-un Imprimante Laser (A4, Imprimante, Scanneur, Copieur, USB, 600×600)
Examen de compatibilité avec Linux:
2 évaluations, en myoenne: 5,0 de 52 évaluations, en myoenne: 5,0 de 52 évaluations, en myoenne: 5,0 de 52 évaluations, en myoenne: 5,0 de 52 évaluations, en myoenne: 5,0 de 5
  ( 5 avec 2 évaluations)

Prix: EUR 515,45 (En stock)
(sans frais de ports)

 Achetez sur Amazon.fr



courbe de prix
HP LaserJet Pro M1132 Imprimante tout-en-un Imprimante Laser 
-
Minimum: EUR 76,65 
Maximum: EUR 299,99  
Mis à jour: 23/03/2016 16:05

Examen de compatibilité avec Linux

The HP Laserjet Pro M1132 is a All-in-One device with integrated laser printer, that has a maximal resolution of 600×600 dpi. This Laserjet is connected per USB and has the USB ID 03f0:042a:

Hewlett Bus 001 Device 002: ID 03f0:042a Hewlett-Packard

The printer and the scanner are fully supported by Linux. The printer is supported by the OpenSource driver foo2xqx, which uses the XQX Stream Protocol, but can as well be used with the HP driver HPLIP. The minimal version of the HPLIP driver is 3.10.4 to fully support the printer.

In Ubuntu (e.g.. 12.04) the package hplip is already included. Alternatively, the driver can be downloaded at:
http://hplipopensource.com/hplip-web/models/laserjet/hp_laserjet_professional_m1132_mfp.html. In this case the driver has to be installed after downloading it (after unpacking it. root access will be necessary for the installation):

sh hplip-3.11.7.run

In Ubuntu the installation can be performed with the package management system and the configuration can be carried out by the command:

sudo hp-setup

During the setup proprietary binary files will be downloaded from the internet. Therefore, an internet connection is necessary to successfully setup the driver.

Scanner:

The scanner will be found by the installied Scanimage program:

device `hpaio:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH4AEMTPR1a' is a Hewlett-Packard HP_LaserJet_Professional_M1132_MFP all-in-one

If the scanner is found the scan can be startet by the console program

hp-scan

If a paper is placed in the scanner and the scan button on the printer is pressed, the scanned image will be copied to the home folder as « hpscan001.png”.


Matériel Linux Similaire

scroll left scroll right

Commentaires

Utilisez la section commentaires pour nous suggérer des corrections de l'article et des sorties de commandes lspci -vnn, lsusb, lshw, dmesg, etc...
De plus, vous pouvez utiliser les commentaires pour nous communiquer vos expériences avec le matériel ou pour rechercher de l'aide pour la configuration.
 
L'adresse email n'est pas rendue publique.
Submitting comment...