Longshine LCS-PS101-2 Impresora Server (LAN, USB)

Impresora Ethernet, LAN, Longshine, Impresora Server, USB

Longshine LCS-PS101-2 Impresora Server (LAN, USB)
Compatibilidad con Linux:
2 votos, media: 3,0 sobre un total de 52 votos, media: 3,0 sobre un total de 52 votos, media: 3,0 sobre un total de 52 votos, media: 3,0 sobre un total de 52 votos, media: 3,0 sobre un total de 5
  ( 3 con 2 valoraciones)



Revisión de Compatibilidad con Linux

The Longshine LCS-PS101-2 printserver can connect an USB printer to the ethernet LAN.

The configuration of the printer can be performed by the gnome-cups-manager, which can be installed in Ubuntu by the command:

sudo apt-get install gnome-cups-manager

The web interface of the printserver is accessed at the URL


http://192.168.xxx.xxx/SYSTEM.HTM

Furthermore, the configuration can be carried out via telnet:

telnet 192.168.178.3

After configuration of the printserer, the connected printer can be added to the Linux system as an “Network Printer: UNIX Printer LPD”.

It is not possible to use the scanning unit of an All-in-One printer together with the LCS-PS101-2. The device does not support bidirectional communication, i.e. no signals are send back from the printserver to the PC. This also means that the CUPS can produce error messages due to missing feedback from the printserver, although the printing was carried out successfully.

A configuration description for this device in Ubuntu can be found at (in German): http://wiki.ubuntuusers.de/Printserver/Longshine_LCS-PS101-2.


Hardware de Linux similares

scroll left scroll right

Commentarios

Por favor, emplee la sección de comentarios para indicar correciones del artículo así como extractos de lspci, lsusb, lshw, dmesg etc. Además, utilice la sección para el intercambio de experiencias con este componente de hardware o para obtener ayuda para la configuración de otros propietarios de este mismo hardware.
 
La dirección de correo electrónico no será publicada
Submitting comment...