HP Officejet 4500 Impresora Multifunctión

Impresora Multifunción Impresora Multifunción, HP, Impresora, Escáner, USB

HP Officejet 4500 Impresora Multifunctión
Compatibilidad con Linux:
3 votos, media: 5,0 sobre un total de 53 votos, media: 5,0 sobre un total de 53 votos, media: 5,0 sobre un total de 53 votos, media: 5,0 sobre un total de 53 votos, media: 5,0 sobre un total de 5
  ( 5 con 3 valoraciones)



Tendencia del precio
HP Officejet 4500 Impresora Multifunctión
-
Minimum: EUR 128,03 
Maximum: EUR 1.588,00  
Actualizado: 27/05/2016 14:55

Revisión de Compatibilidad con Linux

The HP All-in-One printer HP Officejet 4500 with integrated scanner is fully supported by the HP Linux Imaging and Printing Driver since version 3.10.2. The All-in-One device is also available in a version with WiFi under the ID 4500W.

The hplip driver can be downloaded from http://hplipopensource.com/hplip-web/install/install/index.html, where also a detailed step-by-step printer installation description is available.

In Ubuntu this driver can be installed with the “Synaptic Package Manager”. The necessary files are hplip and hplip-cups.

The integrated scanner is supported by xsane or by the command-line tool hp-scan (the version 4500W also supports scanning per WiFi):

HP Linux Imaging and Printing System (ver. 3.11.10)
Scan Utility ver. 2.2

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Using device: hpaio:/net/Officejet_4500_G510n-z?ip=192.168.1.2

warning: No destinations specified. Adding 'file' destination by default.
Using device hpaio:/net/Officejet_4500_G510n-z?ip=192.168.1.2
Opening connection to device...

Resolution: 300dpi
Mode: gray
Compression: JPEG
Scan area (mm):
  Top left (x,y): (0.000000mm, 0.000000mm)
  Bottom right (x,y): (215.899994mm, 381.000000mm)
  Width: 215.899994mm
  Height: 381.000000mm
Destination(s): file
Output file:
warning: File destination enabled with no output file specified.
Setting output format to PNG for greyscale mode.
warning: Defaulting to '/home/test/hpscan001.png'.

Warming up...

Scanning...
Expecting to read 10.1 MB from scanner.
Reading data: [******************************************] 100% 10.1 MB
Read 10.1 MB from scanner.
Closing device.

Outputting to destination 'file':
Saving to file /home/test/hpscan001.png

Done.

Hardware de Linux similares

scroll left scroll right

Commentarios

Por favor, emplee la sección de comentarios para indicar correciones del artículo así como extractos de lspci, lsusb, lshw, dmesg etc. Además, utilice la sección para el intercambio de experiencias con este componente de hardware o para obtener ayuda para la configuración de otros propietarios de este mismo hardware.
 
La dirección de correo electrónico no será publicada
Submitting comment...