Seagate ST8000AS0002-1NA17Z (Hard Drive, 8 TB, SATA)

DVD / CD / HD Harddisk, SATA, Seagate

Seagate ST8000AS0002-1NA17Z (Hard Drive, 8 TB, SATA)
Linux compatibility:
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)



Review of Linux Compatibility

The Seagate ST8000AS0002-1NA17Z is a with 8 TB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
ata6: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b280 irq 19
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-9: ST8000AS0002-1NA17Z, AR13, max UDMA/133
ata6.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access     ATA      ST8000AS0002-1NA AR13 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdd] 15628053168 512-byte logical blocks: (8.00 TB/7.27 TiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg3 type 0

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Debian GNU/Linux 8.6 (jessie) 3.16.0-4-amd64 - 27/11/2016

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...