Seagate ST380215A (Hard Drive, 80GB, 7200 RPM, IDE, 3.5 Inch)

DVD / CD / HD 3.5 Inch, Harddisk, IDE, Seagate

Seagate ST380215A (Hard Drive, 80GB, 7200 RPM, IDE, 3.5 Inch)
Linux compatibility:
0 votes, average: 0.0 out of 50 votes, average: 0.0 out of 50 votes, average: 0.0 out of 50 votes, average: 0.0 out of 50 votes, average: 0.0 out of 5
  ( 0 with 0 ratings)

Price: $ 55.00 (on stock)
(without shipping costs)

 Buy from Amazon.com



Review of Linux Compatibility

The Seagate ST380215A is a with 80GB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
ata10.01: ATA-7: ST380215A, 3.AAD, max UDMA/100
ata10.01: 156301488 sectors, multi 0: LBA48
ata10.01: configured for UDMA/100
scsi 9:0:1:0: Direct-Access     ATA      ST380215A        D    PQ: 0 ANSI: 5
sd 9:0:1:0: Attached scsi generic sg1 type 0
sd 9:0:1:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 9:0:1:0: [sda] Write Protect is off
sd 9:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 9:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 9:0:1:0: [sda] Attached SCSI disk

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Ubuntu 16.04.1 LTS 4.4.0-57-generic - 22/12/2016

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...