Hitachi HDS5C3030BLE630 (Harddisk, 3TB, SATA, 3.5 Inch)

DVD / CD / HD 3.5 Inch, Drive, Harddisk, Hitachi, SATA

Hitachi HDS5C3030BLE630 (Harddisk, 3TB, SATA, 3.5 Inch)
Linux compatibility:
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)



Review of Linux Compatibility

The Hitachi HDS5C3030BLE630 is a harddisk with 3TB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
ata4: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffe80 irq 27
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: Hitachi HDS5C3030BLE630, MZ6OAAB0, max UDMA/133
ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDS5C303 AAB0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg3 type 0
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
openSUSE Tumbleweed 4.8.10-1-default - 28/11/2016

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...