Samsung HA200JC (Harddisk, 200 GB, 5400 RPM, 3.5 Inch)

DVD / CD / HD 3.5 Inch, Harddisk, Samsung, SATA

Samsung HA200JC (Harddisk, 200 GB, 5400 RPM, 3.5 Inch)
Linux compatibility:
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)

Review of Linux Compatibility

The Samsung HA200JC is a harddisk with 200 GB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfe00 irq 14
ata5.00: ATA-7: SAMSUNG HA200JC, WS100-33, max UDMA/133
ata5.00: 390721968 sectors, multi 16: LBA48
ata5.01: ATAPI: BENQ    DVD DD DW1640, BSHB, max UDMA/33
ata5.01: WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled
ata5.01: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
ata5.00: configured for UDMA/133
ata5.01: configured for UDMA/33
scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HA200JC  0-33 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg0 type 0
 sda: sda1
sd 4:0:0:0: [sda] Attached SCSI disk

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Scan Date
Debian GNU/Linux 8.6 (jessie) 3.16.0-4-686-pae - 03/12/2016

Similar Linux Hardware

scroll left scroll right


Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
Email address will not be published.
Submitting comment...