Pheenet WD-2.4G (WiFi Detector, IEEE 802.11b/g, USB)

Network 802.11g, Detector, Pheenet, USB, WiFi

Pheenet WD-2.4G (WiFi Detector, IEEE 802.11b/g, USB)
Linux compatibility:
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)



Review of Linux Compatibility

The Pheenet WD-2.4 is a WiFi detector, which detects hotspots and Wireless Accesspoints. It can also be used as a standard WiFi stick. The device has the USB ID 0ace:1215:

Bus 001 Device 004: ID 0ace:1215 ZyDAS ZD1211B 802.11g

and is automatically supported under Linux:

usb 1-8: new high-speed USB device number 4 using ehci-pci
usb 1-8: New USB device found, idVendor=0ace, idProduct=1215
usb 1-8: New USB device strings: Mfr=16, Product=32, SerialNumber=0
usb 1-8: Product: USB2.0 WLAN
usb 1-8: Manufacturer: ZyDAS
usb 1-8: reset high-speed USB device number 4 using ehci-pci
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
zd1211rw 1-8:1.0: phy0
usbcore: registered new interface driver zd1211rw
zd1211rw 1-8:1.0 wlx000e2eaa5bd2: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlx000e2eaa5bd2: link is not ready
usb 1-8: firmware version 0x4810 and device bootcode version 0x4802 differ
zd1211rw 1-8:1.0: firmware version 4725
zd1211rw 1-8:1.0: zd1211b chip 0ace:1215 v4802 high 00-0e-2e AL2230_RF pa0 ---NS
IPv6: ADDRCONF(NETDEV_UP): wlx000e2eaa5bd2: link is not ready


Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...