HP Smart Array P440ar (Controller, Raid)

I/O Controller, Harddisk, HP, Raid

HP Smart Array P440ar (Controller, Raid)
Linux compatibility:
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)

Price: $ 298.00 (on stock)
(without shipping costs)

 Buy from Amazon.com


Review of Linux Compatibility

The HP Smart Array P440ar is a 12Gb/s SAS Raid controller for Gen9 HP servers. The card has the PCI ID 103c:3239:

03:00.0 RAID bus controller [0104]: Hewlett-Packard Company Smart Array Gen9 Controllers [103c:3239] (rev 01)
	Subsystem: Hewlett-Packard Company Smart Array [103c:21c0]
	Kernel driver in use: hpsa

and is automatically supported by the Linux kernel:

hpsa 0000:05:00.0: Logical aborts not supported
hpsa 0000:03:00.0: RAID              device c6b3t0l0 added.
hpsa 0000:03:00.0: Direct-Access     device c6b0t0l0 added.
scsi 6:3:0:0: RAID              HP       P440ar           4.02 PQ: 0 ANSI: 5
scsi 6:0:0:0: Direct-Access     HP       LOGICAL VOLUME   4.02 PQ: 0 ANSI: 5

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Scan Date
Debian GNU/Linux 3.16.0-4-amd64 - 02/12/2016

Similar Linux Hardware

scroll left scroll right


Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
Email address will not be published.
Submitting comment...