Tandberg SLR140 (Tape Drive, 140 GB, SCSI)

DVD / CD / HD Drive, internal, SCSI, Tandberg, Tape Drive

Tandberg SLR140 (Tape Drive, 140 GB, SCSI)
Linux compatibility:
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)

Review of Linux Compatibility

The Tandberg SLR140 is an internal tape drive for 70 and 140 GB tapes. It is connected via SCSI and automatically recognized by the Linux kernel:

scsi 2:0:4:0: Sequential-Access TANDBERG SLR140           0600 PQ: 0 ANSI: 2
scsi target2:0:4: Beginning Domain Validation
scsi target2:0:4: wide asynchronous
scsi target2:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
scsi target2:0:4: Domain Validation skipping write tests
scsi target2:0:4: Ending Domain Validation
scsi 2:0:4:0: Attached scsi generic sg2 type 1
st 2:0:4:0: Attached scsi tape st0
st 2:0:4:0: st0: try direct i/o: yes (alignment 4 B)
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Scan Date
Debian GNU/Linux 3.16.0-4-686-pae - 25/11/2016

Similar Linux Hardware

scroll left scroll right


Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
Email address will not be published.
Submitting comment...