Western Digital WD40EFRX-68WT0N0 (Hard Drive, 4TB, 3.5 Inch, SATA)

DVD / CD / HD Harddisk, Western Digital

Western Digital WD40EFRX-68WT0N0 (Hard Drive, 4TB, 3.5 Inch, SATA)
Linux compatibility:
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)



Review of Linux Compatibility

The Western Digital WD40EFRX-68WT0N0 is a with 4TB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
scsi 4:0:0:0: Direct-Access     ATA      WDC WD40EFRX-68W 0A80 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdl] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 4:0:0:0: [sdl] 4096-byte physical blocks
sd 4:0:0:0: Attached scsi generic sg12 type 0
sd 4:0:0:0: [sdl] Write Protect is off
sd 4:0:0:0: [sdl] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdl: sdl1 sdl9
sd 4:0:0:0: [sdl] Attached SCSI disk

Identified Hardware Configurations (2 Results)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Arch Linux 4.8.10-1-ARCH - 25/11/2016
Ubuntu 16.10 4.8.0-27-generic - 24/11/2016

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...