Hitachi HTS725016A9A364 (Harddisk, 160 GB, Laptop, SATA)

DVD / CD / HD 2.5 Inch, Drive, Harddisk, Hitachi, SATA

Hitachi HTS725016A9A364 (Harddisk, 160 GB, Laptop, SATA)
Linux compatibility:
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)

Price: $ 46.00 (on stock)
(without shipping costs)

 Buy from Amazon.com



Review of Linux Compatibility

The Hitachi HTS725016A9A364 is a harddisk with 160 GB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1840 irq 14
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 0)
ata1.00: ATA-8: HITACHI HTS725016A9A364, PCBZC70F, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72501 C70F PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Ubuntu 16.04.1 LTS 4.4.0-47-generic - 24/11/2016

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...