Maxtor STM3500320AS (Harddisk, 500 GB, 7200 RPM, 3.5 Inch)

DVD / CD / HD 3.5 Inch, Harddisk, Maxtor

No image available
Linux compatibility:
0 votes, average: 0.0 out of 50 votes, average: 0.0 out of 50 votes, average: 0.0 out of 50 votes, average: 0.0 out of 50 votes, average: 0.0 out of 5
  ( 0 with 0 ratings)

Review of Linux Compatibility

The Maxtor STM3500320AS is a harddisk with 500 GB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
ata2.00: failed to resume link (SControl 30)
ata2.00: SATA link down (SStatus 4 SControl 30)
ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
ata2.01: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133
ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: configured for UDMA/133
scsi 1:0:1:0: Direct-Access     ATA      MAXTOR STM350032 MX15 PQ: 0 ANSI: 5
sd 1:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:0: Attached scsi generic sg2 type 0
 sdb: sdb1
sd 1:0:1:0: [sdb] Attached SCSI disk

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Scan Date
Debian GNU/Linux 7.11 (wheezy) 3.2.0-4-686-pae - 10/11/2016

Similar Linux Hardware

scroll left scroll right


Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
Email address will not be published.
Submitting comment...