Western Digital WD5003ABYZ-011FA0 (Hard Drive, 500GB, SATA, 3.5 Inch)

DVD / CD / HD 3.5 Inch, Harddisk, SATA, Western Digital

Western Digital WD5003ABYZ-011FA0 (Hard Drive, 500GB, SATA, 3.5 Inch)
Linux compatibility:
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)



Review of Linux Compatibility

The Western Digital WD5003ABYZ-011FA0 is a with 500GB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
ata5: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b300 irq 123
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-8: WDC WD5003ABYZ-011FA0, 01.01S03, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5003ABYZ-0 1S03 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI disk

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Chakra 4.5.7-1-CHAKRA - 10/11/2016

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...