AGFA SnapScan e20 (Scanner, USB, A4, 600×1200 dpi)

Scanner AGFA, Scanner, USB

AGFA SnapScan e20 (Scanner, USB, A4, 600×1200 dpi)
Linux compatibility:
1 vote, average: 3.0 out of 51 vote, average: 3.0 out of 51 vote, average: 3.0 out of 51 vote, average: 3.0 out of 51 vote, average: 3.0 out of 5
  ( 3 with 1 rating)

Category:


Review of Linux Compatibility

The AGFA SnapScan e20 is a USB flatbed scanner with USB ID 06bd:2091

Bus 004 Device 002: ID 06bd:2091 AGFA-Gevaert NV SnapScan e20

It is automatically recognized by the Linux kernel:

usb 4-1: new full-speed USB device number 2 using ohci-pci
usb 4-1: New USB device found, idVendor=06bd, idProduct=2091
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: SNAPSCAN
usb 4-1: Manufacturer: AGFA

and can be used with the SANE scanner drivers. Howver, the original firmware file “snape20.bin” is needed by SANE in order to access the scanner. The file has to be configured in the file /etc/sane.d/snapscan.conf

# firmware /usr/share/sane/snapscan/your-firmwarefile.bin
firmware /lib/swirmware/snape20.bin

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Linux Mint 18 Sarah 4.4.0-31-generic The user provided the following rating for this hardware: 3 out of 5The user provided the following rating for this hardware: 3 out of 5The user provided the following rating for this hardware: 3 out of 5The user provided the following rating for this hardware: 3 out of 5The user provided the following rating for this hardware: 3 out of 5 31/07/2016

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...