Western Digital WD10JPVX-60JC3T0 (Harddisk, 1TB, SATA, 2.5 Inch)

DVD / CD / HD 2.5 Inch, Harddisk, SATA, Western Digital

Western Digital WD10JPVX-60JC3T0 (Harddisk, 1TB, SATA, 2.5 Inch)
Linux compatibility:
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)

Price: $ 55.00 (on stock)
(without shipping costs)

 Buy from Amazon.com



Price trend
Western Digital WD10JPVX-60JC3T0 
-
Minimum: $ 55.00 
Maximum: $ 55.01  
Updated: 10/11/2016 02:19

Review of Linux Compatibility

The Western Digital WD10JPVX-60JC3T0 is a harddisk with 1TB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
ata5: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b300 irq 43
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-9: WDC WD10JPVX-60JC3T0, 01.01A01, max UDMA/133
ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
sd 6:0:0:0: [sdb] 15659008 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access     WDC WD50 00BEVT-60ZAT1    0016 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] 976773164 512-byte logical blocks: (500 GB/465 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1 sdb3
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sdb8): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdb8): recovery complete
EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Ubuntu 14.04.4 LTS 3.13.0-86-generic The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5 02/08/2016

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...