Maxtor 6 L200P0 (Harddisk, 200 GB, IDE, 3.5 Inch)

DVD / CD / HD 3.5 Inch, Drive, Harddisk, IDE, Maxtor

Maxtor 6 L200P0 (Harddisk, 200 GB, IDE, 3.5 Inch)
Linux compatibility:
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)

Price: $ 78.00 (on stock)
(without shipping costs)

 Buy from Amazon.com



Price trend
Maxtor 6 L200P0 
-
Minimum: $ 78.90 
Maximum: $ 78.91  
Updated: 10/11/2016 23:30

Review of Linux Compatibility

The Maxtor 6 L200P0 is a harddisk with 200 GB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
scsi 8:0:0:0: Direct-Access     Maxtor 6 L200P0           0000 PQ: 0 ANSI: 0
sd 8:0:0:0: Attached scsi generic sg0 type 0
sd 8:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
sd 8:0:0:0: [sda] Write Protect is off
sd 8:0:0:0: [sda] Mode Sense: 27 00 00 00
sd 8:0:0:0: [sda] No Caching mode page found
sd 8:0:0:0: [sda] Assuming drive cache: write through

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Ubuntu 14.04.4 LTS 3.16.0-77-generic The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5 27/07/2016

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...