Seagate STM3250318AS (Harddisk, 250 GB, 8 MB Cache, 7200 RPM, 3.5 Inch)

DVD / CD / HD 3.5 Inch, Harddisk, Maxtor, Seagate

No image available
Linux compatibility:
0 votes, average: 0.0 out of 50 votes, average: 0.0 out of 50 votes, average: 0.0 out of 50 votes, average: 0.0 out of 50 votes, average: 0.0 out of 5
  ( 0 with 0 ratings)



Review of Linux Compatibility

The Seagate STM3250318AS is a harddisk with 250 GB storage capacity. It is automatically recognized and fully supported by the Linux kernel:
ata3: SATA max UDMA/133 cmd 0x30d8 ctl 0x30f4 bmdma 0x3020 irq 21
ata3.00: ATA-7: Maxtor 6V250F0, VA111900, max UDMA/133
ata3.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: ATA-8: STM3250318AS, CC38, max UDMA/133
ata3.01: 488397168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/133
scsi 2:0:1:0: Direct-Access     ATA      STM3250318AS     CC38 PQ: 0 ANSI: 5
sd 2:0:1:0: Attached scsi generic sg2 type 0
sd 2:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 2:0:1:0: [sdb] Attached SCSI disk

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...