Seagate Barracude ST380011A (Hard Drive, 80 GB, 7200 RPM, 3.5 Inch, IDE)

DVD / CD / HD 3.5 Inch, Harddisk, IDE, internal, Seagate

Seagate Barracude ST380011A (Hard Drive, 80 GB, 7200 RPM, 3.5 Inch, IDE)
Linux compatibility:
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)

Price: $ 29.00 (on stock)
(without shipping costs)

 Buy from Amazon.com



Price trend
Seagate Barracude ST380011A 
-
Minimum: $ 39.95 
Maximum: $ 129.00  
Updated: 10/04/2016 04:25

Review of Linux Compatibility

The Seagate Barracude ST380011A is a 80 GB hard drive. It is automatically recognized and fully supported by the Linux kernel:

ata2.00: ATA-6: ST380011A, 8.01, max UDMA/100
ata2.00: 156301488 sectors, multi 16: LBA48
ata2: nv_mode_filter: 0x3f39f&0x739f->0x739f, BIOS=0x7000 (0xc0c7c000) ACPI=0x701f (60:900:0x11)
ata2.00: configured for UDMA/33
scsi 1:0:0:0: Direct-Access     ATA      ST380011A        8.01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Linux Mint 17.1 Rebecca 3.13.0-37-generic - 12/01/2016

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...