Seagate ST2000DM001 (HDD, 2TB, SATA, 6Gb/s, 64MB Cache, 3.5 Inch)

DVD / CD / HD 3.5 Inch, Harddisk, internal, SATA, Seagate

Seagate ST2000DM001 (HDD, 2TB, SATA, 6Gb/s, 64MB Cache, 3.5 Inch)
Linux compatibility:
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)

Price: $ 65.00 (on stock)
(without shipping costs)

 Buy from Amazon.com



Price trend
Seagate ST2000DM001 
-
Minimum: $ 49.99 
Maximum: $ 71.63  
Updated: 22/05/2016 10:27

Review of Linux Compatibility

The Seagate ST2000DM001 is a 2 TB hard drive. It is automatically recognized and fully supported by the Linux kernel:

scsi 58:0:0:0: Direct-Access     ST2000DM 001-9YN164       CC4B PQ: 0 ANSI: 5
sd 58:0:0:0: Attached scsi generic sg3 type 0
sd 58:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 58:0:0:0: [sdd] Write Protect is off
sd 58:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 58:0:0:0: [sdd] No Caching mode page found
sd 58:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1
sd 58:0:0:0: [sdd] Attached SCSI disk

Identified Hardware Configurations (2 Results)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Ubuntu 15.10 4.2.0-18-generic - 19/02/2016
Ubuntu 15.10 4.2.0-16-generic - 26/11/2015

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...