Western Digital WD40EZRX-00SPEB0 (Harddisk, 4 TB, Internal, 64MB Cache, SATA)

DVD / CD / HD Harddisk, internal, SATA, Western Digital

Western Digital WD40EZRX-00SPEB0 (Harddisk, 4 TB, Internal, 64MB Cache, SATA)
Linux compatibility:
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)



Review of Linux Compatibility

The Western Digital WD40EZRX-00SPEB0 is a 4 TB SATA hard drive. It is automatically recognized and fully supported by the Linux kernel:

ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: ATA-9: WDC WD40EZRX-00SPEB0, 80.00A80, max UDMA/133
ata2.01: 7814037168 sectors, multi 16: LBA48 NCQ (depth 0/32)
scsi 1:0:1:0: Direct-Access     ATA      WDC WD40EZRX-00S 0A80 PQ: 0 ANSI: 5
sd 1:0:1:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 1:0:1:0: [sdd] 4096-byte physical blocks
sd 1:0:1:0: Attached scsi generic sg3 type 0
sd 1:0:1:0: [sdd] Write Protect is off
sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Linux Mint 17.2 Rafaela 3.19.0-30-generic - 21/10/2015

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...