Maxtor STM3250310AS (Harddisk, 250GB)

DVD / CD / HD Harddisk, internal, Maxtor

No image available
Linux compatibility:
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)



Review of Linux Compatibility

The MAxtor STM3250310AS is a 250 GB harddisk. It is automatically recognized and fully supported by the Linux kernel:

ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
scsi 1:0:0:0: Direct-Access     ATA      MAXTOR STM325031 C    PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
 sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Identified Hardware Configurations (2 Results)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Ubuntu 16.04.1 LTS 4.4.0-31-generic - 08/08/2016
Linux Mint 17.2 Rafaela 3.19.0-30-generic - 21/10/2015

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...