Epson Perfection V700 / GT-X900 (Photo Scanner, USB, 6400 dpi)

Scanner Epson, Photo, Scanner, USB

Epson Perfection V700 / GT-X900 (Photo Scanner, USB, 6400 dpi)
Linux compatibility:
2 votes, average: 4.5 out of 52 votes, average: 4.5 out of 52 votes, average: 4.5 out of 52 votes, average: 4.5 out of 52 votes, average: 4.5 out of 5
  ( 4.5 with 2 ratings)

Price: $ 1,098.00 (on stock)
(without shipping costs)

 Buy from Amazon.com

Category:


Price trend
Epson Perfection V700 / GT-X900 
-
Minimum: $ 869.35 
Maximum: $ 1,106.94  
Updated: 04/03/2016 13:54

Review of Linux Compatibility

The Epson Perfection V700 / GT-X900 is a Photo Scanner with 6400 DPI resolution. It has the USB ID 04b8:012c

Bus 001 Device 002: ID 04b8:012c Seiko Epson Corp. GT-X900 [Perfection V700/V750 Photo]

and is automatically recognized by by the Linux kernel:

usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=04b8, idProduct=012c
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: EPSON Scanner
usb 1-1: Manufacturer: EPSON

The scanner is supported by sane, which can be installed under Ubuntu by

sudo apt-get install xsane

Afterwards, the scanner will be found by sane:


  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04b8 [EPSON], product=0x012c [EPSON Scanner]) at libusb:005:036
found USB scanner (vendor=0x0483 [STMicroelectronics], product=0x2016 [Biometric Coprocessor]) at libusb:003:029
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

and by

device `epson2:libusb:001:002' is a Epson GT-X900 flatbed scanner

A scan can be performed by programs like “xsane” or “simple-scan”.

Furthermore, a commercial driver is available from VueScan.


Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Linux Mint 17.2 Rafaela 3.19.0-30-generic - 21/10/2015

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...