TOSHIBA DT01ACA2, MX4OABB0 (Hard Drive, 3.5 Inch, 2TB, 7200 RPM, SATA3, 6.0 GB/s, 64MB)

DVD / CD / HD 3.5 Inch, Harddisk, Toshiba

TOSHIBA DT01ACA2, MX4OABB0 (Hard Drive, 3.5 Inch, 2TB, 7200 RPM, SATA3, 6.0 GB/s, 64MB)
Linux compatibility:
3 votes, average: 5.0 out of 53 votes, average: 5.0 out of 53 votes, average: 5.0 out of 53 votes, average: 5.0 out of 53 votes, average: 5.0 out of 5
  ( 5 with 3 ratings)

Price: $ 54.00 (on stock)
(without shipping costs)

 Buy from Amazon.com



Price trend
TOSHIBA DT01ACA2, MX4OABB0 
-
Minimum: $ 51.09 
Maximum: $ 72.45  
Updated: 20/06/2016 14:28

Review of Linux Compatibility

The TOSHIBA DT01ACA2 is a 2 TB drive. It is automatically recognized and fully supported by the Linux kernel:

ata6.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] Attached SCSI disk

Identified Hardware Configurations (3 Results)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
openSUSE Leap 42.1 (x86_64) 4.1.12-1-default - 01/12/2016
Linux Mint 17.3 Rosa 3.19.0-32-generic - 23/06/2016
Debian GNU/Linux 8.1 (jessie) 3.16.0-4-amd64 - 22/08/2015

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...