mySmartUSB Light (USB, Adapter)

I/O Adapter, Microcontroller, USB

mySmartUSB Light (USB, Adapter)
Linux compatibility:
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)

Category:


Review of Linux Compatibility

The mySmartUSB Light is an programming tool for Atmel AVR-Microcontroller in USB stick design. It has the USB ID 10c4:ea60

Bus 008 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light

The stick is automatically recognized by the kernel:

usb 8-2: new full speed USB device using uhci_hcd and address 2
usb 8-2: New USB device found, idVendor=10c4, idProduct=ea60
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: CP2102 USB to UART Bridge Controller
usb 8-2: Manufacturer: Silicon Labs
usb 8-2: SerialNumber: 0001

It can also be used under Linux to program microcontroller A detailed product description is available at www.myavr.info (PDF).

Please leave some comments at the bottom of this page explaining how you use this stick under Linux, if you have on.


Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Cadenza Linux 2.6.35.13-1crsem64 - 04/07/2015

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...