Edimax EN-9130TXL (PCI, 10/100 MBit, Ethernet)

Ethernet Edimax, Ethernet, Network card, PCI

Edimax EN-9130TXL (PCI, 10/100 MBit, Ethernet)
Linux compatibility:
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)



Price trend
Edimax EN-9130TXL 
-
Minimum: $ 2.00 
Maximum: $ 5.00  
Updated: 29/03/2016 14:11

Review of Linux Compatibility

The Edimax EN-9130TXL is a PCI network card, which bases on the RTL-8139 chipset. The card has the PCI ID 10ec:8139 and is identified by the Linux kernel in the following way:

00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

The card is fully supported by the rtl8139 kernel module.

The kernel module for the Edimax EN-9130TXL is automatically loaded during the boot process:

eth0: RealTek RTL8139 at 0xa400, 00:11:22:33:44:55, IRQ 5
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

Identified Hardware Configurations (3 Results)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
ALT Linux 3.14.57-std-def-alt0.M70P.1 - 27/02/2016
Debian GNU/Linux testing (stretch) 4.3.0-1-amd64 - 21/02/2016
Ubuntu 14.04.3 LTS 4.2.0-18-generic - 28/11/2015

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...