Traveler TV-6500 (Slide Scanner, USB)

I/O Slide Scanner, Traveler, Webcam

No image available
Linux compatibility:
3 votes, average: 4.3 out of 53 votes, average: 4.3 out of 53 votes, average: 4.3 out of 53 votes, average: 4.3 out of 53 votes, average: 4.3 out of 5
  ( 4.3 with 3 ratings)



Review of Linux Compatibility

The Traveler TV-6500 is a slide scanner, which is connected via USB. The device has the USB ID 0ac8:3370

Bus 001 Device 004: ID 0ac8:3370 Z-Star Microelectronics Corp.

and is automatically recognized und initialized by the Linux kernel:

usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 2-1: new high speed USB device number 10 using ehci_hcd
usb 2-1: New USB device found, idVendor=0ac8, idProduct=3370
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: 338 Camera
usb 2-1: Manufacturer: Vimicro Corp.
usb 2-1: SerialNumber: MI1320_SOC
uvcvideo: Found UVC 1.00 device 338 Camera (0ac8:3370)
input: 338 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/input/input17

As can be seen in this output, the slide scanner is recognized by the kernel as a webcam and not as a typical scanner. Therefore, the kernel module uvcvideo is loaded, which supports the webcam inside the Traveler TV-6500. As a consequence, pictures of the slides can not be taken with a scan program (e.g., xsane) but have to be taken with a webcam program (e.g., cheese) and screenshots have to be taken with the webcam software..

Cheese can be installed under Ubuntu by:

sudo apt-get install cheese

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...