Review of Linux Compatibility
The Reflecta ProScan 7200 scans films (35mm) and framed slides (5×5 cm) with a resolution of up to 3600dpi and colour depth of up to 48 Bit. The scanner is connected via USB and has the USB ID 05e3:0145:
Bus 002 Device 012: ID 05e3:0145 Genesys Logic, Inc.
Although the scanner is recognized by Sane:
# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x0471, product=0x0311) at libusb:003:002 found USB scanner (vendor=0x05e3, product=0x0145, chip=GL842?) at libusb:002:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.
it is not supported. Also the commencial Linux scan software VueScan does not support this model.