Review of Linux Compatibility
The PCI-Express card Longshine LCS 6319o (and not 63190, how often written) extends the PC by one parallel port. The card has the PCI ID 1415:c000
30:00.0 Parallel controller : Oxford Semiconductor Ltd Device [1415:c000] Subsystem: Oxford Semiconductor Ltd Device [1415:c000] Kernel driver in use: parport_pc
and is automatically recognized by Linux and fully supported:
parport_pc 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 PCI parallel port detected: 1415:c000, I/O at 0xdc00(0xd880), IRQ 19 parport0: PC-style at 0xdc00 (0xd880), irq 19, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] lp: driver loaded but no devices found lp0: using parport0 (interrupt-driven).
To access the card the kernel module parport.o is used. If this modul is loaded without any additional options, it uses the I/O port 0×378 as default value for the parallel port. The chosen I/O port can be seen at /proc/ioports by the command
If a different I/O port shall be used, the corresponding options have to be set while loading the kernel module, e.g.:
modprobe parport io=0xc800
This Option can be stored in the file /etc/modprobe.d/options, in order to have it respected at each new system restart automatically, e.g. by adding:
options parport_pc io=0xc800 irq=7
Hardware specification is available as PDF file.
Identified Hardware Configurations (1 Result)This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
||Ubuntu 14.04.2 LTS||3.13.0-48-generic||-||02/04/2015|