TerraTec H7 (DVB-C, DVB-T, CI-Slot, USB)

Multimedia DVB-C, DVB-T, TerraTec, USB

TerraTec H7 (DVB-C, DVB-T, CI-Slot, USB)
Linux compatibility:
3 votes, average: 3.0 out of 53 votes, average: 3.0 out of 53 votes, average: 3.0 out of 53 votes, average: 3.0 out of 53 votes, average: 3.0 out of 5
  ( 3 with 3 ratings)



Price trend
TerraTec H7 
-
Minimum: $ 179.00 
Maximum: $ 422.86  
Updated: 07/04/2016 14:19

Review of Linux Compatibility

USB ID 0ccd:10a3

The TerraTec H7 provides DVB-C and CVB-T via USB port. The box has the USB-ID 0ccd:10a3

Bus 001 Device 003: ID 0ccd:10a3 TerraTec Electronic GmbH

and is supported by Linux since at least Linux kernel version 3.6.8 (please pay attention that this kernel version normally is not part of the current Linux distributions yet). In addition to the demodulator for DVB-T and DVB-S although the CI-Slot can be used with Linux.

For operation the TerraTec H7 needs the three kernel modules mt2063, drxk, and dvb_usb_az6007, which are included in kernel 3.6.8.

The card also needs firmware files that can be download from
http://linuxtv.org/downloads/firmware/dvb-usb-terratec-h7-drxk.fw and
http://linuxtv.org/downloads/firmware/dvb-usb-terratec-h7-az6007.fw if not already included in the used distribution.

The initialisation of the USB box is reported by the kernel in the following way:

usbcore: registered new interface driver dvb_usb_az6007
usb 2-1: dvb_usb_v2: found a 'Terratec H7' in cold state
usb 2-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-terratec-h7-az6007.fw'
usb 2-1: dvb_usb_v2: found a 'Terratec H7' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Terratec H7)
usb 2-1: dvb_usb_v2: MAC address: 11:22:33:44:55:66
drxk: frontend initialized.
usb 2-1: DVB: registering adapter 0 frontend 0 (DRXK)...
mt2063_attach: Attaching MT2063
Registered IR keymap rc-nec-terratec-cinergy-xs
input: Terratec H7 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/rc/rc0/input13
rc0: Terratec H7 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/rc/rc0
usb 2-1: dvb_usb_v2: schedule remote query interval to 400 msecs
usb 2-1: dvb_usb_v2: 'Terratec H7' successfully initialized and connected

USB ID 0ccd:10a5

A new revision of the TerraTec H7 was seen. This revision has the USB ID 0ccd:10a5 and is currently not supported under Linux.


Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...